#1 | 120075 | Nosepiece Ø 2.4mm | 1 | € 5.03 |
#1 | 120076 | Nosepiece Ø 3.0/3.2mm | 1 | € 5.03 |
#1 | 120077 | Nosepiece Ø 4.0mm | 1 | € 5.03 |
#1 | 120078 | Nosepiece Ø 4.8/5.0mm | 1 | € 5.03 |
#2 | 120079 | Front sleeve | 1 | € 11.73 |
#3 | 120080 | Jaw case | 1 | € 12.73 |
#4 | 120081 | Jaw case O-ring | 2 | € 0.34 |
#5 | 120082 | Jaw case quick release ring | 1 | € 9.38 |
#6 | 120083 | Quick release spring | 1 | € 0.34 |
#7 | 120084 | Pull adaptor | 1 | € 10.72 |
#7A | 120129 | C-ring | 1 | € 1.68 |
#8 | 120085 | Gearbox assembly with part 21 & 22 | 1 | € 261.30 |
#9 | 120086 | Jaw set (3pcs)*** | 1 | € 9.38 |
#10 | 120087 | Jaw spreader with metal tube | 1 | € 14.41 |
#11 | 120088 | Jaw spreader spring | 1 | € 0.60 |
#12 | 120089 | Plastic tube | 1 | € 1.68 |
#13 | 120032 | Guide | 2 | € 9.28 |
#14 | 120033 | Guide screw 3×7 | 4 | € 0.34 |
#15 | 120090 | Housing set (L+R) with decals RV50 | 1 | € 15.48 |
#16 | 120035 | Housing screw 3×14 | 10 | € 0.67 |
#17 | 120091 | Mandrel container | 1 | € 2.68 |
#18 | 120037 | Hanger | 1 | € 2.68 |
#19 | 120038 | Belt clip | 1 | € 1.68 |
#20 | 120039 | Belt clip screw M3x12 with washers | 1 | € 0.34 |
#21 | 120040 | Magnet assembly | 1 | € 2.01 |
#22 | 120041 | Magnet assembly screw M3x6 | 2 | € 0.34 |
#23 | 120092 | Position sensor with cable | 1 | € 6.03 |
#24 | 120043 | Position sensor screw 2.3×5 | 2 | € 0.34 |
#25 | 120093 | Control PCBA assembly without cable | 1 | € 38.53 |
#26 | 120094 | Safety switch assembly with cable | 1 | € 1.68 |
#27 | 120095 | Safety switch pusher assembly | 1 | € 1.68 |
#28 | 120096 | Driver PCBA with motor cable | 1 | € 54.61 |
#29 | 120046 | Driver PCBA screw 3×6 | 2 | € 0.34 |
#30 | 120047 | Trigger assembly | 1 | € 2.01 |
#31 | 120097 | Cooling fan with cable (optional from s/n: xxxx) | 1 | On request |
#32 | 120098 | LED assembly with cable | 1 | € 1.68 |
#33 | 120050 | Motor assembly with motor cable | 1 | € 132.63 |
#34 | 120099 | Flat signal cable 10-pins from control PCBA to driver PCBA | 1 | € 0.67 |
#35 | 120054 | Li-ion 20V 4.0Ah battery pack | 0/1/2 | € 87.10 |
#36 | 120055 | Fast charger 110-240V, 50-60Hz with EURO style cable | 1 | € 22.78 |
#A1 | 120100 | Retention nosepiece Ø 2.4mm | Optional | € 11.06 |
#A1 | 120101 | Retention nosepiece Ø 3.0-3.2mm | Optional | € 11.06 |
#A1 | 120102 | Retention nosepiece Ø 4.0mm | Optional | € 11.06 |
#A1 | 120103 | Retention nosepiece Ø 4.8-5.0mm | Optional | € 11.06 |
#A2 | 120104 | Monobolt retention nosepiece Ø 4.8mm | Optional | € 11.06 |
#A3 | 120036 | Rear cap | Optional | € 2.01 |
#A4 | 120105 | Small mandrel container | Optional | On request |