| #1 | 120106 | Nosepiece Ø 4.0mm | 1 | € 5.70 |
| #1 | 120107 | Nosepiece Ø 4.8/5.0mm | 1 | € 5.70 |
| #1 | 120108 | Nosepiece Ø 6.0mm | 1 | € 5.70 |
| #1 | 120109 | Nosepiece Ø 6.4mm | 1 | € 5.70 |
| #2 | 120110 | Front sleeve | 1 | € 12.06 |
| #3 | 120111 | Jaw case | 1 | € 12.73 |
| #4 | 120112 | Jaw case quick release ring | 1 | € 9.38 |
| #5 | 120113 | Quick release spring | 1 | € 0.34 |
| #6 | 120114 | Pull adaptor O-ring | 1 | € 0.34 |
| #7 | 120115 | Pull adaptor | 1 | € 10.72 |
| #7A | 120130 | C-ring | 1 | € 1.68 |
| #8 | 120116 | Gearbox assembly with part 22 & 23 | 1 | € 297.61 |
| #9 | 120117 | Jaw set (3pcs)*** | 1 | € 11.73 |
| #10 | 120118 | Jaw spreader | 1 | € 7.30 |
| #11 | 120119 | Jaw spreader spring | 1 | € 0.60 |
| #12 | 120120 | Metal tube | 1 | € 7.37 |
| #13 | 120089 | Plastic tube | 1 | € 1.68 |
| #14 | 120032 | Guide | 2 | € 9.28 |
| #15 | 120033 | Guide screw 3×7 | 4 | € 0.34 |
| #16 | 120121 | Housing set (L+R) with decals RV64 | 1 | € 15.48 |
| #17 | 120035 | Housing screw 3×14 | 10 | € 0.67 |
| #18 | 120091 | Mandrel container | 1 | € 2.68 |
| #19 | 120037 | Hanger | 1 | € 2.68 |
| #20 | 120038 | Belt clip | 1 | € 1.68 |
| #21 | 120039 | Belt clip screw M3x12 with washers | 1 | € 0.34 |
| #22 | 120040 | Magnet assembly | 1 | € 2.01 |
| #23 | 120041 | Magnet assembly screw M3x6 | 2 | € 0.34 |
| #24 | 120092 | Position sensor with cable | 1 | € 6.03 |
| #25 | 120043 | Position sensor screw 2.3×5 | 2 | € 0.34 |
| #26 | 120093 | Control PCBA assembly without cable | 1 | € 38.53 |
| #27 | 120094 | Safety switch assembly with cable | 1 | € 1.68 |
| #28 | 120095 | Safety switch pusher assembly | 1 | € 1.68 |
| #29 | 120122 | Driver PCBA with motor cable | 1 | € 54.61 |
| #30 | 120046 | Driver PCBA screw 3×6 | 2 | € 0.34 |
| #31 | 120047 | Trigger assembly | 1 | € 2.01 |
| #32 | 120097 | Cooling fan with cable (optional from s/n: xxxx) | 1 | On request |
| #33 | 120098 | LED assembly with cable | 1 | € 1.68 |
| #34 | 120050 | Motor assembly with motor cable | 1 | € 132.63 |
| #35 | 120099 | Flat signal cable 10-pins from control PCBA to driver PCBA | 1 | € 0.67 |
| #36 | 120054 | Li-ion 20V 4.0Ah battery pack | 0/1/2 | € 87.10 |
| #37 | 120055 | Fast charger 110-240V, 50-60Hz with EURO style cable | 1 | € 22.78 |
| #A1 | 120123 | Retention nosepiece Ø 4.0mm | Optional | € 11.06 |
| #A1 | 120124 | Retention nosepiece Ø 4.8-5.0mm | Optional | € 11.06 |
| #A1 | 120125 | Retention nosepiece Ø 6.0mm | Optional | € 11.06 |
| #A1 | 120126 | Retention nosepiece Ø 6.4mm | Optional | € 11.06 |
| #A2 | 120127 | Monobolt retention nosepiece Ø 4.8mm | Optional | € 11.06 |
| #A2 | 120128 | Monobolt retention nosepiece Ø 6.4mm | Optional | € 11.06 |
| #A3 | 120036 | Rear cap | Optional | € 2.01 |
| #A4 | 120105 | Small mandrel container | Optional | On request |
